Minimal LiFePo4 20h battery bracket/holder
Print Profile(1)
Description
I made this bracket to keep my batteries in a line. It's not intended to be strong. There are stronger ones. The idea is to make them wobble less. The wall is supposed to be 1mm, but for some reason it is less than that. I could increase that if I get requests to do so.
I printed with PLA and 30% infill - turned out 10.14g. It's probably not a good idea if you intend to draw lots of current and the batteries get hot.
The + and - signs can be printed in red/black and glued to the main print using CA glue.
I Added second model with mounting tabs. There are two models - for flat head and countersunk (wood or machine) screws. The holes are 5mm. 4 to 5mm screws should fit well.
I printed again in Bambo PETG HF. Turned out great. I had no problem gluing the + and - signs with CA glue (I used Loctite)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)