Bionicle Bohrok 3x scale

Full set of all the Bionicle Bohrok in 3x scale, optimized for 3d printing.

I've added all the necessary pieces in separate print profiles for every Bionicle.

I've tried to match the piece colors as close as possible with the available Bambu PLA Basic colors, but of course you can use whatever you have at home.

Everything is organised into the least number of plates by color. The settings are optimized, and I've also spent a lot of time tuning the size of all of the elements, so you can just hit print and enjoy the result.

You'll have to use some glue for the two pieces of the faceplate, this way you don't need and AMS, and you don't have to waste a lot of time and filament.

I've included a TPU band as well, but of course you can use a strong rubber band or hair tie as well for the model.

You can follow the original building guide of the set, basically all of the models are the same. One exception is that the 2 thin lower body parts are printed from 2 parts so they are prettier without supports. You don't necessarily have to glue them, but you can if you wish. Also, the 2 thin upper body parts are printed on different sides, so you can put the uglier support side inside in both sides.

There's a separate print profile with every Krana, feel free to choose one as your liking.

jay16799 / Bionicle Bohrok 300% Scale had most of the pieces, but it missed the shields of Tahnok, the rubber band, and some Krana as well, all of them are included here.

I've also added the missing jay16799 / Bionicle Bohrok 300% Scale Krana Holder 41673 and jay16799 / Bionicle Bohrok Faceplate Multipart 300% Scale.