Print Profile(1)
Description
If you like this project and want to support me, click the Boost button!
Boost Me (for free)
I would appreciate any support. Have fun printing, your buddys3D
Bring order to your cable chaos!
This robust holder allows you to securely attach your power strip to walls, desks, or workbenches. Thanks to the slide-in design, the power strip can be easily inserted or removed for mobile use at any time.
Highlights:
* Perfect Fit: Optimized for power strips with a cross-section of up to 50.2 x 41 mm.
* Stability: The holder is simply fixed with two screws (integrated countersunk holes for a flush finish).
* Clean Look: No more cables lying around on the floor or work surface.
* Either drill and screw (3.5mm) to the wall / table or shelf, or glue firmly.
* Easy Print: The design is optimized to be stable and can be printed without complicated supports.
Technical Data:
* Outer dimensions: 60 x 50 mm
* Inner dimensions: 50.2 x 41 mm
* Mounting: 2x screw holes (3.5mm) for a secure hold
Tip: Briefly measure your power strip before printing. If it is slightly narrower, you can glue a small piece of double-sided tape or foam rubber into the holder to achieve a perfect "Snug Fit"!
If larger, simply scale in the slicer.
If you like this project and want to support me, click the Boost button!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)