Dug Out Organizer Version3

CHECK PRINT PROFILES FOR UPDATES IVE ADDED ICECREAM DRIP TO 2 VARIATIONS

Version 3 of this Dug Out organizer allows you to add names to the left, right and bottom of the plate. the name plates are removable and interchangeable. 

I've added a little bump on the cup slide to help hold it Tight. This will require a hard push to get it in place. You can glue in place as well. 

No hardware needed.

No supports.

AMS only needed for Name Plates. Make sure you Edit the names in a slicer or they will say NAME.

Also included blank name plates that you can use acrylic markers on to write what you want.

• LOOK AT NEW PRINT PROFILES FOR UPDATED NAME PLATES. 
• NEW BLANKS UPLOADED
• NEW STITCHING PLATE UPLOADED

There are 2 name plate sizes. The longer one can only be used for the bottom location. 

I've included a screenshot of the TEXT settings if you want to copy them just in case they don't transfer when you edit the text.

• NAME PLATE WILL REQUIRE A HARD PUSH TO SNAP IN PLACE. Can also be removed with effort if needed

Don't recommend PLA. 

Profile is for PETG. 

PLEASE PAY ATTENTION TO THE PRINT PLATES!

All name plate options are uploaded on different print plates. 

WARNING. ORCA slicer seems to be messing with the files in some way. Use ORCA at your own risk. If you have had success using ORCA without the print shifting Please Let me know. Otherwise there have been many many successful prints. Thank you for all the support.

These S hooks are perfect for hanging the Dug out Organizer to the fence.

12 pack- https://amzn.to/40AQisz

40 pack- https://amzn.to/4cioO24

100 pack- https://amzn.to/3MA9CDa

Or you can use carabiners. I recommend 3inches or larger.