Oil Catch Can - Free 3D Print Model

Search models, users, collections, and posts

Blaney66

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

X1 Carbon

H2S

H2C

P1P

P2S

H2D

P1S

H2D Pro

X1E

X2D

A2L

0.2mm layer, 4 walls, 25% infill

Designer

16.8 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Oil catch can with mounts, interior baffling, and filter threads

Designed this oil catch can to be able to receive 2 inlet lines and one outlet line. There's a spot to thread a ½ npt brass filter on the inside. The oulets and inlets are interchangable from 3/8, ½, or 5/8.

There is also a groove under the top parts for a 2.5mm o-ring

This was never tested on a car but seems to work on its own

Make sure you have your infill at 100% and at least 5-6 walls and a filament that can withstand high enough heat

All parts are designed to be easy to print and assembled afterwards/ glued in place

Comment & Rating (2)

@user_3944610121

This design is very well thought out, i need a catch can for my truck and will be printing this, will probably assemble it in the slicer, not a fan of glue in high temp situations, may modify if needed but will post feedback and will be printing in ABS 3 walls and 40% for bigger parts and probably a couple modifiers at 100 for hose fitting ends and tubes

@TODINHO

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.