[1-meter] Unicorn GDRX-0-0 Armored Form [Arms + Shoulders]

2026/2/23 Update: I have uploaded the arm and shoulder components, which require a large number of plates for printing, click on my homepage to print the head + upper body!!

Preview: Next are the waist and legs, and the main body will be complete, congratulations to all the fans following along!!! You'll have a 1-meter armored Unicorn!

Instructions before printing! Important! Important!

1. This file will be continuously updated until the 'Unicorn Full Armor Complete Body' is finished, current update progress: Arms and Shoulders, Status: Complete

2. Given the popularity of the large armored Unicorn online, I have made the joints fully adaptable, many parts can be used for reference as their appearance is very similar, but please note they are not interchangeable!!!

3. This space is reserved for future updates and additions

Production Design:

I spent a lot of time researching, remodeling, and studying RQ's design philosophy, considering many aspects of the real MGEX Unicorn's style and making similar references, however, the modeling process inevitably relied on the rationality of RQ's design, so I tried to reconstruct a Unicorn in non-armored form, but the initial design was only to create a head, resulting in an ornament that could only be displayed as a bust. Until I delved into the armored Unicorn and realized I could design a head that adapts to the armored body, but in many places I wanted to reference the GK style, so the first few versions had many problems. The current version retains the appearance of RQ's style but has been reconstructed with many FDM printing-specific surfaces to facilitate perfect printing results.

Points to note:

1. The Unicorn GK reference style currently only replicates the RQ style, but the polygon count, slots, and connection ports do not align and only match this print plan, so it cannot be universally used with RQ's plans, however, the joint connections have been fully adapted, meaning you can apply them to the joints, but please pay attention to subsequent update instructions.

2. The Unicorn version with lighting has a separate wiring channel model, it's an either/or choice and cannot be mixed with the color-separated version.

3. Still in the early stages of learning FDM printing and not having a deep enough understanding of assembly models, I only referenced the styles of MGEX and RQ, thank you for your understanding and support; I will continue to improve it later.

4. The plans are only published by this author on DY and MW.

The main body is 1 meter tall, currently updated to the head, printing parameters are adapted for A1 and above, please pay attention to parameter alignment.

Still the old style: Inner structure PETG, outer armor PLA. Using a 0.4mm nozzle, 0.12BBL process. The texture is exceptionally good!

【Eagerly publishing this, though it might seem a bit rough, I wanted to share this plan with everyone here. Hope you like it.】

Installation difficulty is very low, those who have printed other Gundam models can install it smoothly, if you don't know how to install it, search for 'Huizong's Latte' on Douyin, the name is the same across all platforms, feel free to raise your hand and ask questions

-

-

-

Installation diagram, but it is still highly recommended to watch a video for installation, and you can ask questions directly! 3D printing requires communication!