NAB Hubs for Tape Recorder - Reel-to-Reel Machine
Print Profile(1)
Description
… it doesn't always have to be aluminum
These are NAB hubs for reel-to-reel tape recorders with 28cm reels
These hubs are lightweight and fulfill their purpose just like the aluminum hubs
The quality here is now set to 12mm
The print bed and nozzle temperature should be adjusted to your filament
I like to use PLA Silk here for a nice shine
3 screws are needed per hub - 5x10mm fan screws, so I can attach the hubs to the NAB adapter with a little finesse
Please note: The quality of the print has a lot to do with very well-dried filament and a very clean
print bed. Please check your printing environment and adjust the bed and nozzle temperature to your filament.
The models shown here are printed exclusively with Bambu Lab P1S.
*Filament dryer: https://amzn.to/4e4uEVr
*Container for storing filament spools: https://amzn.to/4eyK6sQ - the filament spools
fit in there perfectly
*Silica - granules - https://amzn.to/4fxnWbx - I use 40g per container (4L), if the granules have
become dark due to humidity, they are dried in the oven at approx. 70 degrees, they turn orange again and
can be reused
*Bambu Lab P1S 3D Printer: https://eu.store.bambulab.com/products/p1s?from=navigation
Disclaimer:
* - External links contain affiliate data. If something is ordered through these links, I will receive a small commission, it will cost you nothing extra.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)