TETRIS balance - TILOS the game
Print Profile(1)
Description
I have created my own version of a TETRIS Balance game. TILOS the game!
The game is unique due to its game principle and individual parts, offering fun with little material
Everything can be printed without an AMS and glued together later
The TILOS parts are printed without a bottom and top, so the infill can be seen
The seesaws should not be modified, otherwise the center of gravity will no longer be correct and the game will become harder, easier, or even impossible
-----------------------------------------------------------------------------------------------------------------
Regarding the rules:
There are 3 modes in which the game can be played
- normal
- easy
- cooperative
-----------------------------------------------------------------------------------------------------------------
In normal mode, the following rules apply:
You roll the piece dice and thereby decide which piece must be stacked on the seesaw
Here are 6 different symbols:
1. Play T-piece
2. Play I-piece
3. Play L-piece
4. Play O-piece
5. Play S-piece
6. Roll event dice
If the event dice must be rolled (?) then the following applies: (These can of course also be adjusted)
Player must / may
1. Remove piece
2. Rotate piece
3. Relocate piece
4. Skip turn
5. Piece must form new highest point
6. Desired piece
-----------------------------------------------------------------------------------------------------------------
In easy mode (suitable for relaxed players or children), the same rules apply, except that the easy seesaw is used. This one is larger and has a different center of gravity. This allows for higher and easier stacking
-----------------------------------------------------------------------------------------------------------------
In cooperative mode, the easy seesaw is also used, and you try to stack all pieces without disturbing each other. Completely different rules could also apply here; be creative
-----------------------------------------------------------------------------------------------------------------
I currently use a Filament Box to store the game
You can also apply your well-known Tetris skills here :D
Feel free to show me if you print the TILOS parts with other infills and your colors and designs
Have fun printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)