Search models, users, collections, and posts
P2S Exhaust Carbon/HEPA Filter Pack
Remixed by
IP Report
Print Profile(2)
PETG-HF, 0.2mm layer, 2 walls, 15% infill
Designer
5.8 h
2 plates
ABS: 0.2mm layer, 2 walls, 15% infill
6.1 h
2 plates
Open in Bambu Studio
Boost
167
795
121
30
354
249
Released
Description
PLEAE READ CAREFULLY
The model contains a negative geometry for the HEPA filter space. Order your 15mmx40mmx80mm HEPA filters and measure 3 of them side-by-side. Then scale this negative object ONLY in the X and Y to match your measurements (do not scale Z or use “uniform scale”). This is so you get a proper fit as the tolerances of these filters are not very good.
Plate 2 includes the modified version of the Exhaust Kit housing and filter bracket. The Carbon/HEPA requires about 10mm more space, so you will need to print this version of the Exhaust Kit.
Here are the materials I used:
Activated Carbon - Replacement Acid-Free Activated Carbon (1 Lbs) – VOXELPLA
You will also need the External Exhaust Fan Kit - P2S from Bambu Labs.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (121)