Grout cross spacers for tiles Parametric generator
Print Profile(1)
Description
Boost Me (for free)
Click “Follow” so you don’t miss the next models. Share your photos in the comments and, if you found it useful, leave a like 👍 or a boost 🚀. Every suggestion is always welcome.
Parametric generator for cross tile spacers used to set grout gaps between tiles.
You can use the ready-to-print profile or create a fully customized spacer.
🔹 Ready-to-print profile
Includes the most commonly used sizes:
1 – 1.5 – 2 – 3 – 4 – 5 – 8 – 10 mm
The same sizes are also included in STL format.
🔹 Custom spacer
You can adjust the following parameters:
- Thickness → grout gap size
- Length → total spacer length
Height → total spacer height
🔹 Print settings
- Recommended material: PLA / PETG
- Layer height: 0.2 mm
- 2 walls
- 15% infill
- No supports required
| 🔹 Printing multiple pieces - Bambu Handy : keep only the desired size selected, then choose the number of copies (from 1 to 10). - Bambu Studio: download the STL or 3MF file (ready size or custom) and duplicate it as needed. |
Questions or doubts? Send me a message using the button 
on my profile.
Boost Me (for free)
Click “Follow” so you don’t miss the next models. Share your photos in the comments and, if you found it useful, leave a like 👍 or a boost 🚀. Every suggestion is always welcome.
My collections:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)