X1C/P1S Active Chamber Heater 400w
Print Profile(1)
Bill of Materials
- 400W 80mm PTC Fan Heater x 1: https://www.amazon.com/400W-Electric-Temperature-Insulation-PTCYIDU/dp/B0F62STF3M/ref=sr_1_1_sspa
- C8 Panel Mount Plug Adapter x 1: https://www.amazon.com/dp/B07PVP7V1Y?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3
- XY-SA30 30A Electronic Thermostat Controller x 1: https://www.amazon.com/dp/B0DDXVCG9R?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
- M3x8 Screw x2 x 1: For C8 adapter
- M3x10x4.2 heat set insert x2 x 1: For C8 adaptor
- 1/8" x 5/16" magnets x18 x 1: https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html
Description
Easily print with filaments that require warmer chamber temperatures. This heater quickly heats the chamber and keeps it at your desired temperature as long as needed. There are plenty of X1C/P1S chamber heaters out there, some more utilitarian than others, but I wanted one that both looked and functioned like a quality piece of equipment. Being in the States, many of the models required components that were not easily sourced here. So I took Old No 07's model and redesigned it from the ground up to utilize components easily found locally or on Amazon. I've successfully printed ABS, ASA, PPS-CF, and PPA-CF with this heater.
This heater is capable of temperatures well above 65 °C. Please consider the temperature ratings of the electronic components in your printer.
Feel free to reach out with any questions about printing PPS-CF and PPA-CF on the X1C or P1S printers.
This remix is based on
License
Comment & Rating (8)