Bambu X1 Printer Model Kit | Kit Card

I have crafted an interlocking kit model of the Bambu X1, drawing inspiration from Catherine Doucet's project.

This model is a scaled-down rendition of the Bambu X1, meticulously maintaining accurate proportions in length, width, and height.

I have incorporated numerous details to enhance its refinement and visual appeal.

The model boasts exceptional ease of printing, requiring no support structures. Only black and gray filament are needed.

The assembled model exhibits remarkable sturdiness, owing to the addition of a closed bottom surface, a departure from Catherine Doucet's design.

The assembled model exhibits remarkable sturdiness, owing to the inclusion of a sealed base, a modification from Catherine Doucet's original design.

Printing on a P1S takes approximately two hours.

The assembled model measures approximately 45 x 45 x 54.6 mm (excluding certain protrusions).

Update as of 2024/3/18

The initially uploaded version may exhibit inconsistencies when printed with specific materials. Consequently, I have uploaded a revised iteration.

Utilize the "Revised Version (larger holes, bug fixes)" print profile for optimal results.

I conducted a reprint utilizing the limited Bambu PLA I had available:

I conducted further testing using the limited Bambu PLA I had available:

Some component holes may be slightly oversized, necessitating a small amount of adhesive for secure joining.

Some holes may be larger than intended, requiring a small amount of adhesive for secure assembly.

I trust you will find this model pleasing!

I hope you enjoy this model!

Inspiration source:

https://makerworld.com/zh/models/199117