Elegant jewelry box with removable inserts -No AMS - Free 3D Print Model

Search models, users, collections, and posts

Homedesign3D

Household>Decor

IP Report

Print Profile(1)

All

A1 mini

X1E

H2D Pro

P1P

P1S

H2S

H2D

P2S

H2C

X1 Carbon

X2D

A2L

0.2mm layer, 2 walls, 5% infill

Designer

22.6 h

7 plates

4.5(11)

Open in Bambu Studio

Boost

468

1378

361

142

Released

Description

Membership

Want to sell prints of this design? You can get a Commercial License via my profile, allowing you to sell physical prints of all my models while your subscription is active :)

Join

Stunning Jewellery Box with Flower Details 🌸

A spacious and elegant jewellery box designed to match my other models - with a strong focus on functionality, print quality and a beautiful finish.

This is a larger multi-part print, which is reflected in the total print time. The full build takes approximately 22 hours and uses around 680g of filament. It’s well worth it in my opinion and I hope you’ll enjoy it as much as I do :-)

Design Features

2 drawers with different inserts for several types of jewellery
1 compartment with inserts placed under the lid
Removable inserts that can be printed in different colors (no AMS required)

If you plan to use the box for other items and prefer standard drawer space, simply skip printing the inserts and scale the remaining parts to suit your needs.

Important Notice

Some parts require supports to achieve the best result and avoid visible layer lines.

The support settings and orientation of the parts have been carefully customized and tested for each part to ensure a clean surface, stable printing and easy removal.

Some parts may look oriented a bit “unusual”, but please do not change orientation or support settings in the print profile if you want results matching the photos.

If you loved this model, you can checkout my other matching models in this collection:

https://makerworld.com/collections/21657980

Filament Used

Bambu Matte PLA (Latte)
3D Saga Wood PLA (Cherry)

All feedback and ideas are very welcome!

Boost Me (for free)

Enjoyed this model? A Boost would mean a lot and helps me keep creating and improving future designs. Thanks for the support! 🚀

jewelry accessory box

Comment & Rating (35)

@user_3861192055

Print Profile

0.2mm layer, 2 walls, 5% infill

great print 😆

The profile uploader has replied

@Tn13005

Beautiful, thanks for sharing!😄

@StopTheBrick

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

The profile uploader has replied

@Tn13005

Looks good! I recommend if you want to get a really clean print on the lid part, to print it at an angle - like the print profile. Uses up a bit more filament for support but the quality will be soo much better😄

@user_711213126

This turned out absolutely beautiful. I had a heck of a time printing the main box but I think it was my fault because I'm new to all this but the end result I'm so pleased with. Thank you so much for sharing

The designer has replied

@Tn13005

Thank you so much for the feedback, really happy you enjoyed it😊

@user_711213126

Replying to @Tn13005 :

Heres the picture that you asked for. Thanks again

@Tn13005

Replying to @user_711213126 :

Thank you for sharing the picture! I can definitely see what you mean with the main body. I would highly recommend starting a full calibration, tweak heat and fan cooling + possibly reduce the print speed significantly for inner/outer walls. There are loads of different tests for overhangs, temp towers etc. on makerworld, so you can find the most optimal settings. Just keep in mind different filament types and brands may have different tolerances, even if it’s all labeled PLA😊

@drewdives

Print Profile

0.2mm layer, 2 walls, 5% infill

Printed very nicely with polymaker coPE

The profile uploader has replied

@Tn13005

great to hear, thank you for the rating!

@petar_G

Print Profile

0.2mm layer, 2 walls, 5% infill

I have printed the part multiple times with my 3D printer and truly tried everything to get a good result. I used various materials, all directly from Bambu Lab, including PLA. I worked with different speeds, both slow at 50 percent and at the standard speed of 100 percent. I also varied the temperature, setting it both lower and higher. The print bed was clean and in good condition. Despite all these attempts, the result at the end was not satisfactory. The part basically works, but it looks visually very bad and has many printing defects. Overall, I cannot recommend it.

The profile uploader has replied

Show original

@Tn13005

Did you follow the designated print profile? How did you orient the different parts? As mentioned, the orientation is key to get a flawless print with good detail, so I recommend using the print profile provided. If you can share some more info and pictures of your issue, I might be able to help. I’ve printed several of these myself on both A1Mini and P2S with different filaments - including off brand PLA - and I’ve never had an issue with quality, so I’m sorry to hear that..

(Edited)

@Tn13005

This is some images up close taken with flash, to show the printing quality and detail level. I’ve worked very hard to make sure the detail and quality is excellent. I’m not sure what could have gone wrong without further information, but I would love to help if possible. I’ve never had a print fail of this model, although several has been printed in different brands of PLA (basic, plus, wood and matte).

(Edited)

@UniqueLoup

Is it possible tobuy/subscribe commercial licence for your models?

The designer has replied

@Tn13005

I have definitely thought of this, but thought I would wait a bit until I had a bigger portfolio of designs. However, I can definitely look into setting this up soon with my current models😊 I’ll keep you posted!

@Tn13005

Hi, I have just setup my commercial license, if you are interested. The link is in the description for my models :) @UniqueLoup

@VesperDesign

So pretty! Have you seen the makeup boxes "Flower Knows Cosmetics" comes in? The chests with drawers and a door are a DREAM!!!

The designer has replied

@Tn13005

Just checked it out, it’s stunning!! I’ve seen a bit of their makeup online, but haven’t really checked out the brand before now. They really got their packaging down!😍

(Edited)

@msilvestri

flores know-how cosmetics

@FAR3D

can it all be scaled up?

The designer has replied

@Tn13005

@FAR3D Yes, just make sure to do uniform scaling on all parts😊

@user_2405632549

Boosted

Hello, would it be possible to scale it to 125%

The designer has replied

Show original

@Tn13005

Hi, first of all, thank you for the boost - really appreciate it! You can freely scale it to 125% (or bigger) depending on your needs. It’s just very important that you double check all parts are scaled to the same percentage, so everything fits together😄

@UniqueLoup

Beautiful! Reminds me grandma, brings warmnes to my heart. Will definitely make this for my wife <3

The designer has replied

@Tn13005

Thank you so much! Hope she will enjoy it😄

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.