Elf in Green

A mystical elf figure emerges from a textured forest scene, creating a magical and atmospheric print.

Print instructions:

Print with 100% infill, a layer height of 0.08 mm, and a base layer height of 0.16 mm.

Filaments used: 

BambuLab PLA Basic Black 

BambuLab PLA Basic Mistletoe Green

BambuLab PLA Basic Beige 

BambuLab PLA Basic Jage White

Swap instructions: 

Start with Black, 

switch to Green At At layer 8 (0.72 mm),, 

switch to Beige At layer 10 (0.88 mm), 

switch to White At layer 23(1.92) for the rest of the print

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position