Charging Stand for Vuse Ultra and Veev One

I have created a charging station here for the Vuse Ultra and Veev One. The devices fit very precisely into the holder and are directly in the correct position for the USB-C connector. Additionally, I have included a compartment for one pod from each respective device to make sensible use of the space.

Required:

-4x Pan head screw M3*8 (Hakkin 1250 Pieces M2 M3 M4 M5 Screw Set, Pan Head Hex Socket Carbon Steel Threaded Screw Set Hex Screws with Nuts Hex Head Button Screws and Washers Assortment Kit : Amazon.de: DIY & Tools)

-4x Threaded insert M3 (ruthex Threaded Inserts M2 + M3 + M4 + M5 Assortment Box - 70 + 100 + 50 + 50 pcs. LEAD-FREE Brass Threaded Bushings - for melting a threaded sleeve into 3D printed plastic parts : Amazon.de: DIY & Tools)

-2x USB-C Plug (VISSQH 20 Pieces USB Type-C Socket, 3A 2 Pin USB C plug solder, 24AWG USB C Cable, 2-Wire USB C Panel Mount Socket, USB-C Plug for Panel Mounting: Amazon.de: Computers & Accessories)

-1x USB-C Socket (Mumjooyi 6 pcs USB-C Socket 2-pin USB Socket 3A Fast Charging Type-C Socket with Snap Groove Buckle for Panel Mounting Black (6 pcs) : Amazon.de: Computers & Accessories)

- some heat shrink tubing for insulation (Eventronic Heat Shrink Tubing Set 900 Pieces, IP56 Waterproof Heat Shrink Tubing, Total 40.5 m, 12 Sizes, Ideal for Electrical Insulation and Wire Connections, Black, Never Fade : Amazon.de: Commercial, Industrial & Scientific)

I have also soldered in a plug connection, which is not necessary for the function. (20 Pairs 1.25 mm JST 2 Pin Micro Electronics Male and Female Connector Plugs with 10 cm Wire Cable: Amazon.de: Electronics & Photo)