Volvo XC90 Keychain (PIP WW)

If you enjoyed this model, remember to like, follow, and support my work with a nice 

If you're interested in using my models, several membership plans are available, even if you just want to buy me a coffee to show appreciation for my work :D

If you have any requests, don't hesitate to ask in the comments or personal messages!

For anything, don't hesitate to contact me; every request will be fulfilled promptly!

One of the models that kept me busy the most, between unexpected events and printing time:

No problem, here's the Volvo XC90 from a few years ago, revisited and brought to you in keychain format!

Being a perfectionist, I had to pay attention to every little detail to ensure the finished model lived up to those already published, including wheels perfectly designed to work once the printing was finished and the supports were removed.

This is a request I received a while back, and I hope it's still of interest; 

if not...well, another model to add to someone else's collection :D

Have fun!

Every model is PIP; the wheels are actually working.

I used AMS to achieve optimal multicolor results.

The model requires no assembly; you just need to carefully remove the tree supports already set in the print profile.

Better results can be achieved using the 0.2 mm printhead, at the expense of increased print times.

It's recommended NOT to change the print profile settings to avoid having problems with the final result.

I invite you to use tweezers and small pliers to remove the supports.

In more recent models, I've used smaller tolerances for the wheel alignment, to ensure a higher level of detail and fewer supports to remove in that area.

For this reason, it's necessary to "break in" the car once the supports have been removed (trying a couple of times) :D