Parametric Rope Hook
Print Profile(2)
Description
I wanted to create some kind of wardrobe for our caps and hats and i stumbled over rope hooks.
But this rope hook wardrobe cost over €150, so I decided to make such hooks myself.
And since I had wanted to do a project with OpenSCAD for a long time, I created these parametric rope hooks.
With this, you can create your own hooks, regardless of the rope's thickness or the hook's required length. Whether a bent hook or a short, small one with an additional prong, any combination should be possible.
It works best if you thread the rope through the hook from above.
Boost Me (for free)
Please let a Boost here, so i can spend more time into creating new models or improve my existing models
Due to its design and a sharp inner edge, the hook easily holds small weights. Unfortunately, it's not designed for larger weights (e.g., jackets, backpacks).
You can increase the size of the inner edge using the "grip depth" parameter, but this also makes threading the hook more difficult.
For me, the best setting was to adjust the rope thickness to the measured rope thickness + 2mm; otherwise, I couldn't insert the rope.
Here is a brief explanation of the parameters:
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)