TBS Source One V6 - antenna DJI O4 Pro
Print Profile(1)
Description
Designed for TBS Source One V6 (Mid / Long Range Builds)
Engineered and flight-tested by LowFly 3D, this component is specifically designed for the TBS Source One V6 platform in mid and long range configurations.
Every part is developed through real flight experience and crash testing to deliver the best balance between:
- šŖ¶ Lightweight design
- š”ļø Impact resistance
- š” Functional optimization for DJI O4 Pro setups
- āļø Clean and simple installation
These are not decorative parts ā they are performance-driven components built for pilots.
š” O4 Pro Antenna Mount ā Optimized Position
Custom antenna mount designed for DJI O4 Pro, positioned according to official DJI documentation for optimal signal performance.
Key benefits:
- š¶ Improved signal stability
- š° Better long range reliability
- š Crash-protected antenna exit angle
- š§© Secure and clean mounting system
The geometry ensures proper cable routing and reduces stress on the antenna connector during hard impacts.
š§Ŗ MANDATORY PRINTING REQUIREMENTS
ā ļø IMPORTANT ā Follow these instructions strictly
Recommended material:
- High-quality TPU 95A
- Filament must be properly dried
- esun TPU
Filament humidity:
- Must be between 10% and 15%
- If higher, dry the filament before printing
General recommended settings:
- 3 perimeters minimum
- 100% infill where structurally required
- Moderate printing speed
- Properly calibrated TPU retraction
- Adequate cooling for layer bonding
š Do NOT change the model orientation.
Print exactly as shown in the render images.
The orientation is intentionally designed to:
- Maximize layer strength
- Improve impact resistance
- Prevent structural weak points
- Maintain dimensional accuracy
Changing the orientation may compromise the print.
š ļø LowFly Philosophy
These are not just STL files.
They are pilot-designed performance parts created for:
- Real flight use
- Real crashes
- Lightweight builds
- Clean aesthetics
- Long range reliability
Designed by a pilot. Tested in the field.
Built for serious FPV performance.
ā ļø USAGE & LICENSE NOTICE
This file is provided for personal use only.
- ā Commercial use is strictly prohibited.
- ā Reselling printed parts is not allowed.
- ā Redistributing, modifying, or sharing the STL files is not permitted.
- ā Selling physical prints of this design is forbidden.
This design is intended exclusively for private, non-commercial use.
By downloading this file, you agree to respect these terms.
Unauthorized commercial use or redistribution violates the creatorās rights.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)