Stackable Box - underwear/briefs/socks
Print Profile(6)
Description
Stackable Box - Underwear/Panties/Socks
Specifications
Socks:
- 234x234x80
- 156x2234x80
- 77x234x80
Panties:
- 234x234x80
- 116x234x80
Underwear:
- 234x234x110
Cross-section stacking effect (Angled interlocking structure close-up)
The red box highlights the key interlocking area:
Both the upper edge of the box body and the lower edge of the lid are designed with symmetrical bevels, forming a 'guided nesting' structure.
When stacked, the sloped surfaces automatically correct their position, achieving precise interlocking, effectively preventing horizontal sliding or displacement, and ensuring stability and neatness even with long-term use.
🖨️ Printing Instructions
| Item | Recommendation |
|---|---|
| Recommended material | PLA / PETG (balances strength and precision) |
| Layer height | 0.2 mm (balances speed and detail) |
| Infill rate | 15% to 20% (sufficient for load-bearing, saves filament) |
| Supports needed | No (all models optimized for no supports) |
| Printing direction | Print with box opening facing up (ensures flat bottom for more stable stacking) |
💡 Tip: For best stacking results, ensure the build plate is accurately leveled, the first layer adhesion is good, and avoid bottom warping that could affect nesting precision.
Same specifications as the model below
Click to view: Stackable Box (Hollowed for material saving) - Underwear/Panties/Socks
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)