Unifi Travel Router Multifunction Case - Free 3D Print Model

Search models, users, collections, and posts

TechTobi

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

X1E

H2S

H2C

H2D Pro

X1 Carbon

P1P

P2S

H2D

X2D

A2L

A1 mini

0.2mm layer, 3 walls, 100% infill

Designer

4.6 h

2 plates

4.3(6)

NEW: with integrated snap closure

Designer

4.7 h

2 plates

Open in Bambu Studio

Boost

122

111

Released

Description

Multifunctional housing for safe transport of the new Ubiquiti Unifi Travel Router. It is a pull-out case that can accommodate the device and the supplied USB-C cable.

The highlight: when using an Apple USB-C plug, the inlay can be used as a wall mounting aid in hotels or vacation homes. The housing is simply hung on the plug inserted into a power outlet and the small router is inserted crosswise into the slots provided. Done.

For those of you who like to tinker and use a different power supply, I have uploaded my original files as STEP files.

Printing instructions: I strongly recommend using Support PLA at the interfaces so that the necessary support structure can be easily removed after printing.

Comment & Rating (19)

@Nailbunny

Great idea + design. Boost incoming. It would be perfect if you could add a latching mechanism on the lid though. I'm not a fan of how easily it slides open. A satisfying click when it closes would be perfect.

(Edited)

The designer has replied

@techtobi

I'll think about it. The fit was pretty tight on me. You could increase the height of the inner part by 0.3 to 0.5 mm (in Bambu Studio)

@Nailbunny

Replying to @techtobi :

I didn't want to mess with the scaling and chance the UTR not fitting anymore. Its a good fit it just slides open easily and like others have said risks an accidental drop. Its a great design and so close to perfect. A tab on the cover with recess on the inner part would make it snap closed - Ill try to see if I can add them in the slicer and upload a remix.

@techtobi

I have added a second print profile today and incorporated your change request

Show original

@techtobi

on vacation, works perfectly

Show original

@NeoBlack

Print Profile

0.2mm layer, 3 walls, 100% infill

Fit is not perfect. The drawer slides out of the lid, I don't like it.

Other Issues:Hold of the two parts is not good, slides out too easily, device can fall out and be damaged.

The profile uploader has replied

Show original

@techtobi

1.) please calibrate printer 2.) optionally increase the inner part height by a minimal percentage For me it fits out of the box (P1S)

Show original

@NeoBlack

Replying to @techtobi :

The printer is calibrated, the model has too much play, you can also see that when you measure the parts. It sits much too loosely

Show original

@techtobi

Replying to @NeoBlack :

The distance is exactly 0.3mm between both bodies, that is actually tight. I can gladly upload a modified base for you with less distance if you like. Tell me what you need

Show original

@knuuttila

what’s the best way to get the supports off this, printed twice and it’s unusable with two different pla

The designer has replied

@techtobi

just use support pla for example.

@user_1884683022

if you don't have a special support pla i found using petg as a support/raft interface worked well. Also change the support trees to slim worked just fine. I struggled with the first plate and ended up using a dremel to shave out all the broken support stubs but got there in the end. Thanks for making this!

@Tijmen.Pluimers

for me the support parts are moving in the cover during printing once I am at 91/93% and then it all in error. how to get this solved? I am using the X2D with support material via the second head. it is calibrated

(Edited)

@CodeSquirrel

Print Profile

0.2mm layer, 3 walls, 100% infill

@Tijmen.Pluimers

Print Profile

0.2mm layer, 3 walls, 100% infill

@Renesmee26

Print Profile

0.2mm layer, 3 walls, 100% infill

@kstussy

Print Profile

0.2mm layer, 3 walls, 100% infill

@Naxoz

Print Profile

0.2mm layer, 3 walls, 100% infill

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.