MeshSlide 18650 remix - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

stevens.colt

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 8% infill

Designer

2.9 h

2 plates

5.0(1)

0.2mm layer, 3 walls, 8% infill X1C/P2S/P1S

3.1 h

2 plates

Open in Bambu Studio

Boost

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M2 Button Head Cap Machine Screws (BHCS)

M2x12 BHCS Machine Screw (20PCS) - AA045

M2 Button Head Cap Machine Screws (BHCS)

BT2x6 SHCS Self Tapping Screw (20PCS) - AA093

BT2 Socket Head Cap Self Tapping Screws (SHCS)

Round Threaded Brass Heat-Insert Nut

Bambu Filaments

Select all

Black (33102) / Filament with spool / 1 kg

PETG HF

PLA Silk+

Description

This is an 18650 version of the MeshSlide. I based it on the original and the remix from @ehisforadam.

I've included images demonstrating that it functions with the keyboard, and you don't even need the kickstand!

If you're interested in all the plates with the keyboard and lanyard featuring the 18650 remix, please let me know, and I will add them.

The photo shows the hardware I used (note: I am not completely satisfied with the screws from Makerworld Supply, as the heads strip quite easily). The small screw is one I had extra from disassembling Ryobi battery packs; it measures 7mm x 2mm and works for all parts where plastic is used to hold the screw. Please do not follow my wiring as shown in the picture—it appears to be incorrect. Refer to the original post for accurate wiring instructions.

Boost Me (for free)

Thank you for looking and good luck, please feel free to boost if you can.

Comment & Rating (7)

@Bdsudd12

can you provide a print file for x1c/p1s?

The designer has replied

@stevens.colt

I could but I don't have a way to test it (no printer) so it might get flagged. you should be able to start the print and it will adjust to what you have.

@Bdsudd12

Replying to @stevens.colt :

oh ok

@itsmedant

thanks for making this remix! going to start printing it now. would the original cover slide work? the one that just protects the pins?

The designer has replied

@stevens.colt

the face plate? yes it will. you just need to adjust the side "clamps" and screws

@itsmedant

Replying to @stevens.colt :

Awesome! Just in your post you said something like “if you want all all the plates to work with the 18650” so that’s what I was wondering. I’m wanting to do the protection slide, keyboard, and rotary encoder options on the one I’m building. Thanks for the remix!!