HERO VHS VOLTRON

I am a dad to two beautiful girls and I enjoy showing them the multiverse through 3D Printed nerd objects
This is one of the models from my collection, which I share with those who love 3D printing, also to receive constructive advice and always improve
I am a big Bambu Lab fan and all my prints are made with P2S and A1 Mini

I do test prints at a reduced scale (10 cm) to test the stability and output of the model
But there's an important thing: if you print it larger, around 15 cm, in addition to gaining details, you also gain ease of printing
My advice? Enlarge it as much as you want
You only need a minimum basic knowledge of slicing. If you have doubts, write to me and I'll gladly help you

For testing, I printed it at 10 cm:
PLA Basic white
0.16 extra fine
hybrid tree supports
10 mm outer brim
0 mm object spacing

The supports are very delicate. They can be removed without damage, but one by one, slowly, with tweezers and patience. No need to go Rambo on the support… or you'll regret it

If you want to collect them all… come here (the trap is ready):

https://makerworld.com/en/@Gara/upload

Technical notes (the truth, not poetry)

I prefer to print in a single color and paint after priming with acrylic markers
The colored images are just examples of coloring: then everyone goes by personal taste
The design originates from an AI generation (Tripo), manually refined and tested in FDM to ensure real printability
The “real” photos are the white monochrome ones

The part that decides if you print or swear: bed adhesion

I use CryoGrip Pro Frostbite and the adhesion is so strong that prints seem to have taken out a mortgage on the bed: they never come off
I mainly use Bambu filaments and have no problems

If you have a different setup:

Focus first and foremost on adhesion
Use dry, quality filament
Do things cleanly