Demon Slayer Love Hashira Mitsuri Kanroji Chibi Multicolor Print

Work adjusted using the built-in multicolor lithophane generator

Print with 100% infill, 0.08mm layer height, 0.6mm base layer thickness

The model size is a 120x160mm rectangle with a corner radius of 5
The size can be freely modified, just keep the Z-axis unchanged

Filaments used:

5-color print
    Bambu Lab PLA Starlight Nebula

    Bambu Lab PLA Basic Magenta

    Bambu Lab PLA Matte Ivory White
    Bambu Lab PLA Matte Dark Night Green

    Bambu Lab PLA Matte Grass Green
 

Similar to the previous Mitsuri, the Nebula color produces beautiful color shifts and reflections from different angles, and has high transparency, making it very suitable for the Love Hashira. If this filament is not available, black can be used as the base color

Change Instructions:
    Start with Nebula color
    Change to Magenta at layer 8 (0.84mm)

    Change to White at layer 9 (0.92mm)
    Change to Dark Night Green at layer 14 (1.32mm)

    Change to Grass Green at layer 15 (1.40mm)

    Change to White at layer 16 (1.48mm) and continue until print is complete.

If you only have one AMS, one pause is needed (I have already set this in the file)
    Start with the following 4 colors:
    Slot 1: Nebula
    Slot 2: Magenta
    Slot 3: White
    Slot 4: Dark Night Green
    Pause is set at layer 13 for color change:
    Slot 1: Nebula --> Grass Green