video projector support with remote control holder
Print Profile(1)
Bill of Materials
- Bulloni a croce con dato M4 x 1: 4x20mm
Description
Technical Description of the 3D Printing Project
This project arose from the need to install a video projector at the head of the bed without making holes in the wall or permanent modifications to the room's structure. The support was designed specifically for tubular bunk beds, ensuring stable and secure attachment directly to the bed frame.
The system is compo
Boost Me (for free)
I hope you like this idea 😊
It's just the first in a series: I already have other projects in reserve, ready to take shape!
osed of:
- Video projector support with tubular attachment, compatible with most projectors equipped with standard thread ( ABS Filament )
- Integrated remote control holder, designed to improve ergonomics and organization ( ABS Filament )
- Non-slip TPU element, inserted in the contact areas with the bed tube, to increase friction, reduce vibrations and prevent accidental rotations or displacements ( TPU filament for Bambu Lab AMS )
The design has been optimized for FDM printing, with particular attention to:
- ease of assembly
- structural robustness
- reduction in the use of supports
- compatibility with common materials (PLA / PETG / ABS for the body, TPU for the non-slip insert)
Remote control holder features:
- Custom-sized pocket: I created a rectangular container with 3mm walls. The internal measurements are 50x25mm, suitable for most remote controls, but you can modify them in the first lines of the code (tel_width and tel_depth).
- Horizontal orientation: The clamp remains configured for a horizontal tube, with the remote control hanging vertically underneath it.
- Bottom hole: I added a small central hole at the bottom of the pocket. This serves both to let out any dust and to help you push out the remote control from below if it gets stuck.
- Clean junction: The stem always stops outside the clamp, leaving the tube hole free of obstructions.
A couple of tips:
- Measurements: Take a caliper and measure your remote control. If it's a very thin or very wide model, just change it by resizing [R] Bambu Studio
- Print: I recommend printing it as it appears in vertical slicing with supports.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)