Emergency box (RUM)

Emergency box - Caution! The contents may only be used in certain situations :). 

Designed for 0.2 L bottles in which “drink” are available / produced in the Czech Republic and Slovakia.

In the print profile, the graphic on the lid is inserted as an SVG object. STL files do not contain markings/logo/text - only a clean box can be printed (or you can also add any text directly in the slicer).

Printing without supports, latch is better to print from PETG.

Assembly

In the model are axes for the latch and the hinges designed for diameter 3mm. You need a total of 6 M3x30mm screws.

Depending on the bridging capabilities of the printer, it may be necessary to drill the hinge of the lid with a 3mm drill bit, it must rotate freely around the axis.

Screw carefully so that the material does not a break.