Moza CRP2 Brake Pedal Elastomers (TPU)

This is to replace the stock elastomers that come with the pedals. Mine pedals were open box and only had the Red and Yellow elastomers and someone had smashed them and one yellow was deformed and locked up on the cylinder.  

I have found that 2 walls and 3 top and bottom layers are a good base and then you can adjust your infill to get the desired stiffness.

For TPU, please remember to set your pressure advance and retraction settings accordingly.

The base 3mf file is just the one elastomer shape and you can print how ever you would like. 

The 3mf file that has 16 objects are setup with different infills (which you can change to your preference).

Here are the default values for each column (going up and down from the left to the right)

First Column: 

2 Walls

3 Top and Bottom Layers

15% infill

Grid Infill type

Second Column: 

2 Walls

3 Top and Bottom Layers

20% infill

Grid Infill type

Third Column: 

2 Walls

3 Top and Bottom Layers

25% infill

Grid Infill type

Forth Column: 

2 Walls

3 Top and Bottom Layers

30% infill

Grid Infill type