Aqara H2 Rockers with/without Icon for 2 and 4 Buttons

I wanted to give my Aqara H2 EU light switches a custom cover.

After I had already printed a new frame for it that perfectly fit my installation, I wanted to customize the switch as well.

I used this as the basis for the frame: Aqara H2 Double Frame

If you are also looking for more minimalist/slimmer buttons, feel free to check this out: Aqara H2 Rockers for Jung AS5 Series

The Model:

I designed new rocker switches for my Aqara H2 EU 2 and 4 buttons.

I provided these with appropriate icons/pictograms.

I printed them for myself with Sunlu ABS FR, as I also printed the frame from the same material/with the same white tone.

For easier printing, I have provided corresponding print profiles for PLA here. Here you will also surely find the matching white tone for the frame more easily.

Current Icons:

For the icons, I used the Material Design Icons also used in Home Assistant. If further combinations/icons are needed, please write them in the comments.

Currently, I have uploaded buttons with the following icons.

• Arrow up/Arrow down for roller blinds
• Roller blind open/Roller blind closed
• Light on/Light off
• Light and light strip
• Light and mirror (for my bathroom light)

Print Plates:

I have uploaded the print plates as follows:

• Switches with icons for 2 and 4 buttons
• Switches completely without icons for 2 and 4 buttons
• Switches with icons for 2 and 4 buttons + additional color so that the switch's light does not shine through

Constructive feedback and praise are always welcome.

Show me your switches!

The icons can be easily exchanged in Bambu Studio, otherwise I will gladly upload more versions.