Bus (Splotter board game) - Insert / Organizer
Print Profile(1)
Description
[READ BEFORE PRINTING]
This is an Insert for the board game Bus, published by Splotter.
There is about 15mm of clearance after placing the board on top of all the printed trays. I decided to cover the bottom of the box with a thick piece of cardboard to fill the void so that the pieces don't fly around if the box is stored vertically. If you store the box horizontally, no need to do that.
The pictures show where everything goes. The file names indicate how many prints of each STL you need to make (in case you're not using the 3mf project attached).
After printing the player trays, I noticed that some of the wooden buses are larger than the rest, which is due to the poor manufacturing tolerances of the wooden pieces. I enlarged the holes where these wooden buses go, so you can print the enlarged player tray instead. The wooden buses will not fit as snuggly but at least they will fit for sure. Personally, instead of reprinting the trays, I just decided to chug the ones that don't fit where the action markers are, as seen in the picture for the blue and green player trays.
TL;DR: Print 5 copies of either BUS_Player_tray_enlarged_x5 or BUS_Player_tray_x5, not both!
If you see any issues with the insert, feel free to leave a comment. Enjoy!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)