Print Profile(3)
Bill of Materials
Description
🧸 Magnetic Levitation Teddy - Nature Edition 🌿
Elevate your 3D printing with a touch of magic! This special "Nature Edition" evolves my original design into a beautiful decorative piece. Watch as the teddy bear holds a floating heart under the branches of a stylized tree, using the fascinating power of magnetism and physics.
This model is designed for a support-free print and glue-free assembly.
✨ What's New in Nature Edition?
- Organic Design: Replaced the technical arm with a sleek, minimalist tree.
- Scenery Base: Added a "grassy" textured base for a more complete look.
- Optimized Heart: The heart model has been completely redesigned for lower weight. This ensures much better levitation and stability even with standard magnets.
- No AMS? No Problem!: This model is multi-color friendly even without AMS. You can print it in a single color and easily paint the eyes and nose later with a marker or acrylic paint.
🛠️ What you will need:
- Magnets: 4pcs of Neodymium magnets (10mm x 2mm).
- 1 pc for the heart (inserted during printing).
- 3 pcs for the top case in the tree branch (to ensure a strong pull).
- String: A thin string, thread, or fishing line.
- Glue: Recommended for the heart magnet (see instructions).
📖 Assembly Instructions:
- Heart Magnet (Pause): The provided .3mf file has an automatic pause set. When the printer stops, insert 1 magnet into the heart.
- 💡 Important Tip: If the magnet fits very loosely in the heart cavity, apply a small drop of glue to it before inserting. This prevents the magnet from jumping out and sticking to the metal nozzle when printing resumes.
- Base Assembly: Slide the tree into the "grassy" base. Place the teddy bear on the base and secure him by inserting the lock/pin into the slot.
- Threading & Setup: Thread the string through the heart and then through the teddy's paw. Adjust the string length so the magnetic force pulls the heart upward (keep a 5-10mm gap below the branch). Tie a knot under the paw to secure it.
- Polarity Check: If the heart repels from the tree, simply pull out the magnet case, flip it 180°, and slide it back in.
🖨️ Print Settings:
- Automatic Pause: Pre-configured in the 3MF for magnet insertion.
- Supports: None required.
- Improved Geometry: Lighter heart for 100% reliable levitation.
Do you like the Nature Edition? I would love to see your makes! Please share your photos and don't forget to boost 🚀 or rate ⭐ if you enjoy this "anti-gravity" magic!
Boost Me (for free)
🙏Thank you for downloading👇! If you like the model, please support my work with 🚀 Boost 🚀. I will be very grateful. Thank you.
Membership
💰Want to sell prints of my models?💰 !BECOME AN AUTHORIZED SELLER! ☝️Join the membership and you can earn money💲💵 by selling my models.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (71)