Designer Fidget Ring - Spinning toy

This fidget ring is a finely tuned, rotatable ring system for focus and playful distraction
It consists of two interlocking rings that are precisely printed and perfectly matched

Choose your favorite colors and combine what you like

AMS is only relevant for the DualColor_Print_Profile:  Print by Object→ Only one Color change needed :)

⚠️ Important: The tolerances are very fine. An accurately calibrated printer (Flow, Z-Offset, Extrusion) is crucial for the parts to rotate freely after printing.

The fidget ring has a standard inner diameter of 18 mm
For other sizes, you can simply scale the model uniformly:

• 15 mm → 83.3 %
• 16 mm → 88.9 %
• 17 mm → 94.4 %
• 19 mm → 105.6 %
• 20 mm → 111.1 %
• 21 mm → 116.7 %
• 22 mm → 122.2 %

The cage and the ring are printed separately. Then press them together with a lot of pressure: Note, the cage does not break in the process, I have printed many in PLA and it has always worked. So you don't need to worry.

!!!! The inner ring has a side designed for pressing in, pay attention to this when you place both rings on top of each other !!!!

Top / Last Layer → Use this side for pressing in

Bottom / First Layer → Not suitable for pressing in

Assembly principle is the same as my fidget ring with oval bulges:

Note: You can simply place the two rings between two books and press them in