Search models, users, collections, and posts
Honing guide Jig for bench plane and chisels
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 20% infill for high strength, low mass
1.7 h
1 plate
Open in Bambu Studio
Boost
50
176
19
19
233
162
Released
Description
Summary
Chisel honing guide or jig. Top piece can be turned over which has grooves for 1/4, 1/2, 3/4 and 1 inch chisels as well as a 50mm plane blade.
Parts needed.
- 2 608 (7mm x 8mm x 22mm) bearings,
- 2 1" inch 5/16 hex bolts and wing nuts
- 1 2-1/4" inch 5/16 hex bolt and nut
I made sure this one was designed small enough so small blades can still be honed at lower angles if needed.
The 5/16 bolts can probably be replaced with M8 bolts but I live in US and imperial what I'm used to :)
Print Settings
Filament:
any PETG
How I Designed This
Designed this after trying many other designs, as well as the cheap ones off Amazon and out of need to be able to reliably hone my chisels without fuss.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (19)