Gloomhaven 2nd Labeled Monster Boxes

First project so if there's anything that i need to change let me know!

"Each labeled case holds one (unsleeved) monster deck, plus all associated monster stat sheets and standees.

Lids have the option of 1, 2, 4, 6, and 10 sections. All cases and lids have the same catch system, all are interchangeable (you could put the boss's 2-section lid on the Hound case, or just print 29(32) plain lids, if you really wanted). 

The front and rear faces on these are thin by design, so be careful taking them off the hotbed. No gluing required. If you're looking for speed, you can still get one of the thin (single layer) cases done in about an hour, printing at 0.2mm. "

The change that i made are that i added the monsters that are in gloomhaven 2nd and ajusted the height so it fits (its fits really tight you need to organise them in the boxes so it's fits but it does). I think the standes for gloomhaven 2 are bigger so thats why it didn't fit straight away? im not sure i dont have gloomhaven 1.

In the mf3 file i put every lid for every boxes on the same plates and for the boss you can either print 2 like i did to divide the sheets and the standes or print the bigger one (tho i don't know if they all are gonna fit in i didn't print it but they should based on the height of the model).  

I guess you could have all the boxes the same colors i just did different colors so its easy to find the right monster during setup.

Don't hesitate to ask me anything or if you have advice please give them to me i would like it ahah 

hope you enjoy the boxes