Duke Caboom Stunt Ring from Toy Story 4

This model is a movie accurate Duke Caboom stunt ring from Toy Story 4! I designed this to fit the signature collection Duke Caboom toy, and he is fully capable of jumping through it! I also included a build guide, and the graphic for the ring.

Assembly Instructions: I have included 2 versions of the ring image for your convenience. One is the image all in one piece, in case you have access to a large format printer. The other is the same image sliced into 8.5”x11” sheets so it can be printed from any home printer (how I made mine). Once I had my ring image I printed, I glued it down to a large foam poster board. I chose this material because it is lightweight and sturdy, but if you find something similar then that will work too. Gluing prior to cutting will help you cut out an accurate shape, especially if you are using the image that has been sliced into multiple sheets. After gluing the image down, I cut the ring out using an X-Acto knife. You should now be able to place the ring into the holder and you will be all set! Thanks again and have fun