DJI Mini 3 Propellor Guards - Free 3D Print Model

Search models, users, collections, and posts

MisterDirt

Hobby & DIY>RC

IP Report

Print Profile(3)

All

A1 mini

P1P

X1 Carbon

P1S

X1E

H2D

H2D Pro

P2S

H2C

H2S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.9 h

4 plates

4.7(6)

Less support (read note)

Designer

1.8 h

4 plates

1 plate H2D & variable layer height

5.2 h

1 plate

Open in Bambu Studio

Boost

110

261

327

194

Released

Description

Use TPU for a slight bounce back when your DJI mini 3 drone hits something, or use PETG to make sure they don't break. I simply used PLA +.

THIS IS ONLY FOR THE DJI Mini 3

Note: This project used far more supports than I would have preferred.

Comment & Rating (23)

@Mr._Dirt

Wow! Sooooo cool!

@G2n1a8

i agree

@joseutrealtor

Can we maybe change the print angle and get less supports? Has anyone figured that out? Way too many trees for my liking.

The designer has replied

@Mr._Dirt

same for me unfortunately, you could either download the stl files and try to fix it yourself, or wait a while for me to come up with a new solution. Thanks for the feedback

(Edited)

@Mr._Dirt

Replying to @Mr._Dirt :

I made a new print profile, see if it suits you

@3DEduLi

Print Profile

0.2mm layer, 2 walls, 15% infill

great work

The profile uploader has replied

@Mr._Dirt

thank you, means a lot!

@user_341134243

the less support version is flawed. angles are wrong. impacts props.

The designer has replied

@Mr._Dirt

sorry, I never got a chance to test the profile myself. If you wanted, you could make a print profile with the problem fixed.

@Sanosuke

It's a cool build - only issue I had is that the first one I printed lost one of the small arms but I think that was my fault - little bit of time with the soldering iron getting it "welded" back on and it seems to work well. Guard is clear of the blades and will protect them should it run into anything. Appreciate it.

The designer has replied

@Mr._Dirt

Thank you, good idea of soldering it back on!

@user_960669657

How about mini 3 pro?

The designer has replied

@Mr._Dirt

I don't know if it'll work with that model, I have no way to test that out, sorry.

@Promax_Prints

Very good print. Guards attach well and do not easily break or fall off

@G2n1a8

this turned out way better than i expected

@user_2058616216

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@Mr._Dirt

Thank you

@user_3971814512

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:Stop on the arm breaks

The profile uploader has replied

Show original

@Mr._Dirt

sorry yours broke, what filament did you use? I don't think this has happened to anyone else, though, did you be very careful when you removed the supports? Did all of the guards break or just one?

(Edited)