Lian Li A3 TURZX 8.8 inch Display Back Mount

Foreword:

I have created several mods for the Lian Li A3 mATX case to change its appearance and improve airflow.
My goal was to attach all mods predominantly using the hardware included with the case, so you only need to print the components.

This mod is a holder that allows you to install the 8.8 inch auxiliary display from TURZX in the Lian Li A3 case.

Description:

The holder is designed so that the screen fits very precisely. It might be difficult to insert it the first time. For safety, I have also designed a brace that uses a dovetail connection to prevent the screen from falling out the back.

The holder is secured with only one screw, which is included with the A3 case.

When mounted, the screen can be viewed perfectly through the glass panel, and it also slightly obscures the view of the power supply cables, leading to a clean look.

Print Settings:

I put a lot of effort into the print profiles to make the result as precise as possible. I recommend not changing the settings!

Hardware:

Screws: 1x 6-32 countersunk screw (Lian Li)

Display: TRUZX 8.8 inch LCD Display  Link

Assembly:

After printing the holder, you just need to press the screen into it. It might be a bit tight, as the screen sits very snugly in the holder. I deliberately designed it this way to prevent it from slipping out and falling into the case. For added security, I have also included a brace that 100% prevents the screen from falling out.

The holder has a tab on the underside that grips the bottom of the case, and it is secured at the top with a screw.

I have also designed a holder that mounts at the front, in case you want the screen at the front. Feel free to check out my profile.

Have fun printing, feel free to leave a comment and show your results!