N64 GameShark Pro Port Cover

Hello everyone!! Welcome to another 3d print that I created! I thought it would be helpful for me to create a cover for the port on the back of the N64 GameShark Pro. Since, I don't think I'm ever going to use that port, and I wanted to protect the back of the N64 GameShark Pro port from scratching the stickers on my other N64 games. Unfortunately, that did scratch my Mario Kart 64 Sticker on the front in my bag while I was taking it to a friend's house to use cheat codes for Mario Kart 64. So that's why I created a port cover, so I never have to worry about that problem again. While the port cover can be easy to print but the downside it can break if you mess with it too much. So just to make it stronger I added more wall loops and 100% Sparse Infill. I don't know much about all the settings but the ones I did hopefully made it stronger because I couldn't really change the design. Since, it needed to fit over the port and also it does fit nicely in. The port cover snaps in so it shouldn't fall out since I did measure everything. So be careful when removing it and try not to mess with the 3d print too much. Also, you could maybe try 3d printing it with PETG or a strong TPU might be better or any strong material. Well thanks for reading the description and I hope you will enjoy the 3d print because I really hope it helps because I found it to be pretty helpful. If you enjoyed this 3d print or found it helpful be sure to boost my model and also like this model so other people can find it easier. Enjoy!! Also, be sure to check out my YouTube!!!