SK40 Mill Holder for 610x610mm Drawer

I designed a holder for the drawer here.
The drawer absolutely requires 610x610mm. My drawer has a depth of 240mm (standard workshop cabinet of the Garant brand)

The construction can hold SK40 with 42 slots on the left side and 5 additional slots on the right side for e.g.: large tool heads or 3D coordinate probes
This system is more space-saving than commercially available models. The space saving applies to both the height and the distances from SK40 to SK40 mounts.
The components are labeled 1-20 at the bottom.
All parts must be printed with the top view towards the print bed with no supports.
All components are interlocked via dovetail and glued as desired (Tolerance offset=0.25mm).
The small cylinders are intended to be glued overlapping at the cuts at the bottom.
PLA-PETG-ABS-ASA-PC-TPU possible.
All common printers can print this model except A1 mini

For those with little time who want to print even more stably, I recommend a 0.6mm or even 0.8mm nozzle here, which shortens the time by a third each and makes the print more stable.


You will need:
-at least 3100g PETG
-or PLA
-superglue
-time