Miles Morales HUE FORGE
Print Profile(1)
Description
Miles Morales | HUE FORGE
Print it - isn't that easy?
Boost Me (for free)
If you like this model - boost it!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.44x250mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA+ Esun Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Army Red
At layer #9 (0.8mm) swap to Orange
Border Only Colors from here until the end.
At layer #13 (1.12mm) swap to Jade White for the rest.
If you like my work/project you can make me happy with these options:
- leave a like
- leave a comment
- download the file
- boost me
Have fun printing!!!
Your Timo
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)