cover

mmexport1771409595888.jpg

mmexport1771409604343.jpg

mmexport1771409609353.jpg

plate_1.png

plate_2.png

d550d33daef33400.jpg

激进版本，对材料比较自信的可以尝试，对比保守版本省料约50%，时间节省约50%此版本作为挑战，打印不好可以去评论区喷作者，评分的话随意（作者的材料有点神人-兰博petg换色料，我打印没啥问题，换个材料就不行了）&nbsp;根据需求调节层高和填充，墙数最好大于等于2。需自行打磨、上色、组装。此版本是全尺寸，但无自带挂绳孔&nbsp;

Radical version, those confident in their material can try it. Compared to the conservative version, it saves about 50% material and 50% timeThis version is a challenge. If it doesn't print well, feel free to criticize the author in the comments. Rating is optional (the author's material is a bit divine - Bambu Lab PETG color-changing filament, I had no issues printing, but with other materials, it didn't work)&nbsp;Adjust layer height and infill according to your needs, the number of walls should preferably be 2 or more.Requires self-sanding, coloring, and assembly.This version is full size, but does not come with a lanyard hole&nbsp;

Aha Mask Radical Version, newbies please do not download!!!

不带孔保守版

配件1

带孔保守版

plate_3.png

IMG20260222140718.jpg

IMG20260222141327.jpg

IMG20260222141802.jpg

有问题记得保留图片，到评论区说明情况保守方案，花费材料更多，最好是提前涂打印专用胶水，清洁底板不出意外的话支撑会像图片里的一样脱落，面具内侧可能附着尖锐边缘，需要打磨里面有一份不带挂绳孔的，作为打印第一版失败的补偿

If you have issues, remember to keep the pictures and explain the situation in the commentsThis is a conservative approach, costing more material; it's best to apply dedicated printing glue beforehand and clean the build plateThe supports should come off like in the pictures without issue; the inside of the mask may have sharp edges that need sandingIncluded is a version without lanyard holes, as compensation for the failed first print

Conservative solution with and without lanyard holes, uses more material (if you have issues, explain in the comments, preferably with pictures)

plate_4.png

IMG20260224152522.jpg

IMG_20260224_152835.jpg

IMG20260224153608.jpg

IMG20260224153608 拷贝.jpg

IMG20260224153655.jpg

中间内环需要上色（如图），组装需要胶水，方法如图。一定要看好了再涂胶水！！！并且注意不要粘到手。图里面面具眼角有个支撑没拆完，颜色没有文件里的那么多，只能先测试能不能正常安装，我的错，见谅。

The middle inner ring needs coloring (as shown), assembly requires glue, method as shownMake sure to check carefully before applying glue!!! And be careful not to get it on your handsIn the picture, there is an unfinished support at the corner of the mask's eye, the colors are not as many as in the file, can only test if it can be installed correctly first, my mistake, please forgive me

Multicolor/Separate Parts Version

崩铁阿哈面具，全尺寸cos或装饰可用看好打印配置再打印，有问题评论区说明（有图片最好，越详细越好）单色版本需要打磨上色，多色版本需组装，眼部和嘴最好在内侧粘一层黑纱，带孔版本需要一根挂绳（最好有弹性）&nbsp;会根据需求改进更新…

Honkai: Star Rail Aha Mask, available in full size for cosplay or decorationPlease check the print profile before printing. If you encounter any problems, describe them in the comment section (pictures are preferred, the more detailed the better)The monochrome version requires sanding and painting, the multi-color version requires assembly,It is best to attach a layer of black gauze to the inside of the eyes and mouth. The version with holes requires a lanyard (preferably elastic)&nbsp;Will improve and update based on demand…

Print Profile(3)

Description

Comment & Rating (0)

License

Related Models