Flexible Cable Organizer - Free 3D Print Model

Search models, users, collections, and posts

Pro3DTinkering

Tools>Organizers

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

4.3 h

1 plate

4.7(177)

A1 mini Version

3.9 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

2497

7632

280

126

5.4 k

2.1 k

Released

Bill of Materials

Bambu Filaments

Select all

PETG HF

Description

Print with your favorite PETG filament, the final result is on my YouTube Channel.

Feel free to comment and share your prints; it'll be nice to see them. I would appreciate any feedback!

To support my projects and gain access to a Commercial License, please consider joining my Patreon community.

Thank you,

Happy Tinkering!

Boost Me (for free)

Your support helps bring more creative designs and exclusive content to life!

Comment & Rating (280)

@basilmoulds5

slick. bambu pla worked fine. x1c running Ludacris speed.

@MANGYOKU

Poor design optimization for FDM. The concept is decent, but the execution is flawed. The model's orientation forces the separation stress to act directly against the layer adhesion. Consequently, the part suffers from Z-axis delamination and snaps along the layer lines long before the fused sections can be separated. Even with precision tools, it’s impossible to make it functional. A total waste of filament due to poor structural logic.

The designer has replied

@Pro3DTinkering

Thank you for your feedback and sorry to hear that! what filament did you use?

@MANGYOKU

Replying to @Pro3DTinkering :

Elegoo PETG Pro

@Pro3DTinkering

I zoomed into the image, and it looks like the filament isn’t dry—there are bubbles across the surface. If you want to try again, just make sure the filament is fully dry. Thanks!

@JJ.Grasnarbe

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

printed in TPU white for AMS.. had no problems with separation and additionally super flexible

Show original

@rischi_2307

Print Profile

0.16mm layer, 2 walls, 15% infill

A great model Unfortunately from the halfway point there was so much movement during printing that the printer produced spaghetti but this could certainly have been prevented with slower speed or plenty of Support

The profile uploader has replied

Show original

@Pro3DTinkering

Thank you for your feedback, it might be the filament issue, did you try to print with different PETG filament?

@rischi_2307

No, but I will try it again sometime

Show original

@thad_banwart

I just had the same thing happen to me using PLA Plus but could've been speed or the fact I was printing 5 copies

@dogggs_3D

Printed it in black PLA turned out good

The designer has replied

@Pro3DTinkering

Thank you for your feedback! How the separation process came through?

@dogggs_3D

Replying to @Pro3DTinkering :

The separation process was not that hard

@dogggs_3D

It probably separated the same as PETG but it was really easy to separate And it was more springy

@BuompFam4

Print Profile

0.16mm layer, 2 walls, 15% infill

Cracked and broke when attempting to separate them. Might try it again in TPU rather than PETG.

The profile uploader has replied

@Pro3DTinkering

Sorry to hear that, which filament did you use?

(Edited)

@BuompFam4

Replying to @Pro3DTinkering :

eSun PETG

@Pro3DTinkering

did you dry the filament?

@user_909036474

Print Profile

0.16mm layer, 2 walls, 15% infill

bad unwraping I broke it

The profile uploader has replied

@Pro3DTinkering

sorry to hear that, which filament did you use?

@aleelcordobes

you need to add tolerances, it's too tight

Show original

@user_535995641

Print Profile

0.16mm layer, 2 walls, 15% infill

very good

The profile uploader has replied

@Pro3DTinkering

Thank you!

@ulwdave

Spaghetti City for me at about the 40 min mark.

The designer has replied

@Pro3DTinkering

which filament did you use?

@t.dot56_

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

This is the best print I’ve ever printed it is so perfect and amazing.

The profile uploader has replied

@Pro3DTinkering

Thank you for your feedback and sharing your print!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.