Search models, users, collections, and posts

Half-Cab Flat Bed Kit for Vanquish VRD

Essayon Engineer
Hobby & DIY>RC
IP Report

Print Profile(1)

All
H2D
H2S
H2C
H2D Pro
0.12mm layer, 2 walls, 11% infill
0.12mm layer, 2 walls, 11% infill
Designer
22.4 h
6 plates
5.0(5)
Open in Bambu Studio
Boost
42
103
13
2
74
29
Released 

Description

This is a flatbed kit for the Vanquish VRD. I designed it to working my my JConcepts Warlord cab.  It prints in multiple pieces, so you do not need to use the tool boxes, roll cage, or fuel cell if you do not want to. 

All hardware is M3 counter sunk (flat head) style. M3x8 is about right will work for everything except the rear mounting blocks on the chassis side. You'll want to use button head or cap screws for those.

Fuel cell uses M2 hardware for scale appearance. 

Nothing extraordinary about the print profiles, but the lower the height, the better the tubing and fuel cell will turn out. I did .12 in the photos.

rc crawler
Vanquish
vrd
RC

Comment & Rating (13)

(0/1000)
@pat_cast
is there a way I can print this using a1 printer?
The designer has replied
0
Reply
@user_3144110661
I don't see why not. It should not exceed the build plate dimensions.
0
Reply
@pat_cast
Replying to @user_3144110661 :
I’m completely new to 3D printing and when I go to print this it doesn’t have a1 printer available.
0
Reply
@pat_cast
I figured it out. didn’t know I needed a computer(not just an iPad) to change and sometimes download things
0
Reply
@user_3751115178
hi! it resist well the heat of the sun on a long ride? or du you suggest using petg?
The designer has replied
0
Reply
@user_3144110661
My experience has been pretty positive with PLA. However, PETG is the superior filament in this application. It will resist bumps and tumbles better, and deal with heat better too. The pictures uploaded are with PLA and mainly for aesthetics; but the next time I print it, I will probably switch to PETG.
0
Reply
@user_3751115178
Replying to @user_3144110661 :
It looks great! I did 5 layer on the tubes for strength it feels sturdy💪
0
Reply
@PawPaw74
Print Profile
0.12mm layer, 2 walls, 11% infill
printed great scaled a little for my needs but looks good!
0
Reply
@pat_cast
Print Profile
0.12mm layer, 2 walls, 11% infill
great print.. downsized it a bit to fit my Rc but great !!
0
Reply
@Loonynino
Print Profile
0.12mm layer, 2 walls, 11% infill
0
Reply
@Dww915504
Boosted
Print Profile
0.12mm layer, 2 walls, 11% infill
0
Reply
@user_530760906
Print Profile
0.12mm layer, 2 walls, 11% infill
0
Reply
No more

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

Related Models

Bambu Lab Bed Scraper
Bambu Lab Bed Scraper
jovanmontanez
24.1 k
5.5 k
Bambu Bed Scraper
Bambu Bed Scraper
Bambu Lab
184.3 k
18.2 k
Bed Scraper XL
Bed Scraper XL
ThreeD-Michael
78.8 k
13.3 k
M3/M4 Screw Kit (Screws, Washers, Nuts)
M3/M4 Screw Kit (Screws, Washers, Nuts)
TuTu
24.3 k
7.5 k