LindySurfer

cover

20260216_095142.jpg

20260216_095203.jpg

20260216_095253.jpg

plate_1.png

6de680c0d900bf70.jpg

I used the textured plate, outside down.  This provides the grip. &nbsp;I used tree supports for the screw holes.  &nbsp;Printed multiple in PLA and tolerances are great.  Printed in ASA and there was a bit of shrinkage, so the tweezers were tighter than with PLA.  I suggest upping the ratio to 100.5% or 101% if you use ASA or ABS.  I did not try PETG.  No adhesion issues.  Heat bed to 100C, preheat for 30-40 min.  No Fan.&nbsp;Tool fit is intended to be tight, but if you have any fingernail, you can get the tool out.  I added chamfer to ensure you can get your fingernail on the tweezers and toothpick.  &nbsp;There are other models available, but it bothered me that they did not match.  These match. Enjoy!

0.2mm layer, 2 walls, 15% infill

Toothpick and Tweezers

Toothpick 

plate_2.png

Tweezers

plate_3.png

20260302_161750.jpg

20260302_161806.jpg

Original was in ASA.  Here&#39;s a profile for PETG.  &nbsp;I also added 3 plates.  One for both sides, and a plate for each individual side.

0.16mm layer, 2 walls, 15% infill

Love the Roxon knife, don&#39;t like the tweezers or taking up 2 spaces for a pin, pen and tweezers.  The Swiss had the right idea so I “borrowed” the tweezers and pick from my 91mm Explorer.  One tool on each side. &nbsp;Check out my other models! &nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boosts are always welcome! </boostcontent></boostme>

Roxon Scales for Victorinox Tweezers and Toothpick

ASIA

Print Profile(2)

Description

Comment & Rating (4)

License

Related Models