Man VS Gorilla Fire Hueforge

Please let me know what I can do to improve this one.

Project: Man VS Gorilla_V1_Red_Orange_Yellow.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 108.4x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #f67405 PLA PolyLite Orange  Transmission Distance: 7.5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #20 (1.68mm) swap to Red
    At layer #27 (2.24mm) swap to Orange
    At layer #36 (2.96mm) swap to Yellow

Border Only Colors from here until the end.
    At layer #42 (3.44mm) swap to Black for the rest.