Peg/Multiboard Shelf for DeWalt Charger (DCB102)

I built these models for mounting my DCB102 DeWalt Compatible 2 Port 20v Charger.  It includes the shelf itself and two pegboard mounts/arms.  The shelf has indexing posts on it to perfectly fit into the bottom screw holes of the DCB102 charger to keep it from sliding off.  The mounts/arms can be used on a standard Pegboard or Multiboard setup.

I thought of making it as one object, but felt it was more universal to have the mounts/arms separate so you can space them for what works for you.  In my setup, I did glue the mounts/arms to the shelf itself to prevent slippage.

And yes, this is the first model I've ever shared. I found it quite useful and thought perhaps others would too. If there's any constructive criticism, please let me know.

Here's an unaffiliated link to the charger I used for those who may also be interested:

https://www.amazon.com/dp/B0BVLNY1ST