Unique table lamp (LED 001 kit) - MH001
Print Profile(1)
Bill of Materials
Description
⭐❤️✨ I used many hours on this project to make it work and im very proud of the outcome. A BOOST AND A FOLLOW WOULD MEAN VERY MUCH! - Please help me show this project to the world! Thank you! 🤩❤️✨
This “wavy” lamp is made for the Bambu Lab LED 001 kit - MH001. The vertical fins create a striking architectural look while beautifully diffusing the light. I've printed it using Bambu PLA Basic Blue, but have also earlier tried translucent filament which also gives off an amazing light. I would love to see your choice of color in the comments.
Feel free to contact me with questions or specific changes to the model.
Boost Me (for free)
If you enjoy the model please consider giving a boost and a follow - it helps a lot. Thanks!
Commercial license available at Patreon.
Assembly guide
Start by assembling the diffuser by carefully lining up the top part and bottom part and push straight down until you're left with something like the picture below.
Put glue on the red marked area on each half of the lamp. One of the sides has a groove - put glue in that aswell (See red arrows)
Then lay the center diffuser onto one half of the lampshade. Then lay the other half of the lampshade on top, making sure that the groove lines up. Then push them together. Now use the printed tool to hold together the fins while the glue cures.
Put something heavy on top and wait until the glue has cured.
Now insert the Bambu MH001 LED kit.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)