YoRadio Resko24 MK2 - Internet Radio (ESP32-S3)
Print Profile(1)
Description
Resko24 MK2 is a professional-grade enclosure designed for the YoRadio project. It combines retro-modern aesthetics with smart engineering. The heart of the design is the L-Tray modular system—an internal frame that holds all electronics and slides into the housing like a drawer, making assembly and maintenance incredibly easy.
Software & Compatibility
- Pure YoRadio: This build is designed to run on the standard, unmodified YoRadio firmware.
- No Mods Needed: There is no need for complex code modifications or "fancy" workarounds. It works out-of-the-box with the standard libraries, making it perfect for both beginners and advanced users.
Robust & Solid Design
- Heavy-Duty Construction: Extra-thick walls for superior durability and acoustic insulation.
- Solid Mounting Pillars: Sturdy internal standoffs that won't snap when driving in screws.
- Drill-Ready Front: The front panel is delivered solid/clean. This allows you to choose your own layout. Drilling for your specific encoders is safe and easy thanks to the reinforced walls.
- Premium Finish: Features an internal pocket for 3mm Smoked Graphite Plexiglass (80 x 97 mm) for a sleek "black-out" look.
TECHNICAL SPECIFICATION (BOM)
| Component | Specification | Details |
|---|---|---|
| Main Controller | ESP32-S3 (30-pin DevKit) | Standard YoRadio support. |
| Display | 2.8" TFT LCD ST7789V | Module v1.1. |
| Speaker | Visaton FR8 (4 Ohm, 10/15W) | High-end 8cm (3.3") driver. |
| DAC Decoder | PCM5102 I2S 32-bit | 3.5mm Jack + Dual RCA (L/R). |
| Amplifier | TPA3110D Class D 2x15W | Powered by 12V. |
| Remote Control | HX1838 IR Kit | 17-button remote + receiver. |
| Power Supply | AC-DC 80W Dual Output | 12V (6A) / 5V (1A). |
| AC Socket | C8 "Figure-8" | Cut-out: 21x12.4mm. |
Print Layout & Performance
The project is organized into 3 Plates:
- Plate 1: Main Housing (~8h 38m)
- Plate 2: L-Tray (V309.84) (~6h 14m)
- Plate 3: Accessories (Knobs & Feet) (~1h 27m)
- Total Print Time: Approx. 16h 19m (Bambu Lab P1/X1).
- Tested Filament: Sunlu PLA Matte Black (Standard 0.20mm profile).
KEY FEATURES / Kluczowe cechy:
- [EN] Video Showcase: Check the attached video to see the radio in action :)
- [PL] Prezentacja Wideo: Koniecznie obejrzyj załączony film, aby zobaczyć radio w akcji :)
- [EN] Versatile Audio: Pre-cut for both 3.5mm Jack and RCA (L/R) outputs.
- [PL] Wszechstronne Audio: Wycięcia pod Jack 3.5mm oraz dodatkowe RCA (L/R).
- [EN] Optional WiFi Antenna: Dedicated mounting spot included.
- [PL] Opcjonalna Antena WiFi: Przygotowane miejsce na antenę zewnętrzną.
Creator’s Note & Assembly
[EN] I am a hobbyist and a layman. This project was built through passion and trial-and-error. For assembly, I used self-tapping mounting screws. The pillars are solid and can be drilled out to fit your hardware.
[PL] Projekt amatorski. Radio działa na standardowym oprogramowaniu YoRadio bez żadnych modów. Do montażu użyłem różnych wkrętów. Solidne słupki pozwalają na bezpieczne rozwiercanie.
Author:
Piotr Bartnicki (Resko, Poland)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)