KallRax - 2U mITX PC/Server Tray
Print Profile(2)
Bill of Materials
Description
This is a 2U tray that is suitable for a PC/server based around a mITX motherboard. There is sufficient space for the board to be positioned so that the I/O panel faces the outside of the tray for easy access. There is also space to the side to fit 2 2.5" SSDs or 2.5" HDDs. The CPU can be covered with a low-profile cooler and still fit within the 2U height of the tray.
I have optimized the underside of the tray to provide strength and also air-flow to the underside of the motherboard. There is a single hole in the front for a 16mm switch to power the board on/off.
The complete assembly requires the following parts:
- 4off M3 x 14mm Button Head Screws
- 4off M3 Flat Washers
- 4off M3 Nuts - placed in the voids on the underside of the tray
- 6off M3 x 6mm Cap Head Screws
I printed this in PETG-HF with a 0.6mm nozzle and 0.3mm layer height as this gives the best combination of strength and speed of print.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)