Felix Stray Kids bookmark
Print Profile(1)
Description
Boost Me (for free)
un petit Boost ça fait toujours plaisir ;)
https://www.patreon.com/cw/3D_MENTIEL
Si vous aimez mon travail vennez faire un tour sur mon Patreon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x149.92mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ff831e PLA Forshape Orange Transmission Distance: 6.3
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Instructions de changements:
Commencer par Black
At layer #15 (1.28mm) swap to Orange
At layer #19 (1.6mm) swap to White pour le reste.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)