Wuben C2 Diffused and Signal Light Set
Print Profile(2)
Description
A collection of diffusers and colored light attachments for the Wuben C2 flashlight.
Included:
- An attachment to diffuse light horizontally, ideal for room lighting or area lighting, where a focused flashlight beam is not useful, but rather a lantern-like effect. This attachment must be printed with PETG Translucent (recommended) or transparent PLA Basic.
- Simple colored attachments (if using PLA Basic, make sure it doesn't get too hot)
- A stand (all models in the 3mf have 100% infill, this is not necessary for the stand)
- Glare shield attachment suitable for the caps. The attachment should be printed in white to better reflect the light; the reflector is simply slid onto the cap.
Optional and only for H2 models (due to size).
A box is available as an extra template; the insert for the parts is designed somewhat generously. Since multiple prototypes would have cost too much material and produced too much waste, I refrained from improving the insert. Feel free to link your own insert here in a comment.
The base of the box is from:
https://makerworld.com/en/models/2168356-snaplock-v3#profileId-2351483
The box was created using the parametric modeller. For assembly, please go to the specified page.
Used filament:
PETG Translucent - https://eu.store.bambulab.com/de/products/petg-translucent?id=48055896047964
PLA Basic: https://eu.store.bambulab.com/de/products/pla-basic-filament
Cyan (10603); Bambu Green (10501); Blue (10601); Orange (10300); Red (10200); Jade-White (10100); Black (10101)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)