Sliders for the FMS FJ40 1/10
Print Profile(1)
Bill of Materials
- M3 screws approximately 15mm thread x 4:
Description
Bottom side sliders for the FMS FJ40 1/10 RC model. Designed to be sturdy to protect the body from terrain and rocks, with smooth underside, to allow for sliding over obstacles. Tapered sides should also help with driving over obstacle. There is a very minimal clearance loss, but it should line up almost perfectly with the bottom of the chassis. It is designed to mount to the chassis using the two holes used by the link mount, but you need to use longer M3 screws, as the stock ones will be too short.
You will need 4 M3x15 screws to replace the stock ones.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)